Solar Water Heating Systems
Solar Water Heating Systems heat up water by the use of solar energy. These systems are generally composed of solar thermal collectors, a water storage tank or another point of usage, interconnecting pipes and a fluid system to move the heat from the collector to the tank.

  • Pergola Solar System
    The Pergola Solar Heating System is an innovative application from tube solar heaters. It combines performance as well as architectural objectives to enhance sustainability.
    Typical Features:

    • Dual Objective: Pergola Design and Solar Water Heating System
    • Absorber Type : Direct Flow Vacuum Tube
    • Absorptivity: 90%
    • Maximum Output: 600W/sqm
    • Material and Structure: Aluminum, Wood or Stainless Steel
    more on Pergola Solar System

  • Evacuated Tubes Solar Collectors
    Evacuated tubes are the absorber of the solar water heater. They absorb solar energ y converting it into heat for use in water heating. Heat is trapped inside the collector pipes since it cannot cross the vacuum.
    Typical Features:

    • Number of Tubes per System: 15 - 48
    • Nominal Length of Tubes : 1200mm – 2000mm
    • Absorbent Surface: 1.5sqm – 6sqm
    • Material of Glass: Borosilicate Glass 3.3
    • Heat Loss: <0.8W/ (sqm°C)
    more on Evacuated Tubes Solar Collectors

  • Flat Plate Solar Collectors
    Flat-Plate collectors comprise of an insulated box containing a dark absorber plate under one or more transparent covers. Water passes through pipes located below the absorber plate, and thus it is heated.
    Typical Features:

    • Efficiency: 96% Solar Absorption
    • Absorber Fin Material: Copper
    • Area: 1.8sqm – 6sqm
    • Fluid Capacity: 0.8 l/sqm
    more on Flat Plates Solar Collectors

  • EPDM Solar Collectors
    EPDM is a type of synthetic rubber. It is used to make a solar heat collector for swimming pools solar water heating systems.
    Typical Features:

    • Used for Swimming Pool Heating
    • Material: PVC, EPDM
    • Deterioration-Resistant, Lifetime: 5 – 10 years
    more on EPDM Solar Collectors

  • Storage Tanks
    The storage tank is the container that holds the liquid to be heated.
    Typical Features:

    • Capacity: 100L - 300L for residential systems
    • Could be adjusted in accordance with the system requirements for commercial systems
    • Material: Stainless Steel
    more on Storage Tanks
Copyright © 2010 DAWTEC™